一种用于谐波检测过程中消除谐波背景方法的研究

针对可调谐半导体激光吸收光谱（TDLAS）连续检测技术中,二次谐波背景信号存在漂移的现象,提出改变激光器中心电流实时提取背景信号,以消除连续检测过程中背景信号的漂移对浓度反演的影响。依据波长调制理论推导了二次谐波背景信号的理论表达式,并分析了实际情况下影响二次谐波背景信号的因素。给出激光器在不同工作温度时电流和输出光强度之间的关系曲线,并分析了改变激光器中心电流实时提取背景信号的可行性。结合背景信号搜索方法设计了基于LabVIEW的背景信号提取流程图。设计以氨气为检测对象的TDLAS实验系统,选取了氨气的吸收谱线以及对应的吸收中心电流。在激光器电流全工作区间内只存在唯一吸收峰的情况下,确定实验中各参数的数值及搜索背景的电流范围。实验结果表明：该方法可实时提取谐波背景信号。结合线性最小二乘法拟合反演可有效地减小检测误差及背景信号对浓度反演精度的影响,提高浓度的检测精度及准确性。在连续检测实验中,反演浓度的标准差由2.688 3降到1.856 1,减小背景信号漂移对检测浓度准确性的影响,提高了连续检测的准确性。     

乙醇含量拉曼光谱检测中噪声与背景同时消除方法研究

乙醇含量拉曼光谱检测中,拉曼光谱信号中的各种噪声及光谱荧光造成的基线漂移和样品池背景等,影响了校正模型的预测精度。利用总体平均经验模态分解,将光谱信号分解成若干无模态混叠的内在模式分量,根据排列熵的信号随机性检测判据判断出代表背景信息和噪声信息的内在模式分量,将其置零即可同时消除拉曼光谱中的噪声与背景。将总体平均经验模态分解与排列熵相结合的预处理方法应用于乙醇含量的拉曼光谱检测中,并与小波变换和平均平滑滤波做了对比。实验结果表明：应用总体平均经验模态分解与排列熵相结合的方法能够有效的同时消除乙醇含量拉曼光谱检测中的噪声和背景信息,提高校正模型的预测精度,且使用简便,无需参数设置,对乙醇含量拉曼光谱检测具有实用价值。     

Waves in plasma formed by above-threshold ionization of gas atoms

In the regime of above-threshold ionization of gas atom in the field of laser radiation, plasma with photoelectron distribution consisting of peaks at discrete energy values is formed. It is shown that the number of longitudinal waves in such plasma coincides with the number of peaks in the distribution function. When peaks practically don't overlap, the dispersion law of each wave in the region of short waves is determined by electrons from the corresponding peak. In this case the phase and group velocities of the waves are close to the electron velocity, which corresponds to the peak maximum. It is possible to talk about such waves as an electronic sound, since the perturbations of the electron density mainly arise due to pressure perturbations. When the peaks are narrow, but having a finite width, the Cherenkov damping of waves is exponentially small. Numerical calculations the dispersion laws for of the two and four waves in photoionized xenon plasma, in which the electron distribution function consists of two or four narrow peaks are given.     

Intensity analysis methods for transient signals

Conventionally, the Fourier transform is applied for sound intensity analysis of stationary signals, but this method can be applied for analyzing non-stationary transient signals. Instead of the Fourier transform analysis, instantaneous spectrum analysis methods such as the Wigner-Ville distribution and the wavelet transform are proposed. By using the mathematical example as a transient signal, advantages and disadvantages of these methods including the short-time Fourier transform are compared. From calculation results, it is considered that the STFT method is the most suitable for the accurate measurement of sound intensity levels, but the WT method is also recommended from its higher resolution of transient signals.     

Low frequency in situ metrology of absorption and dispersion of sound absorbing porous materials based on high power ultrasonic non-linearly demodulated waves

The present work is related to acoustic in situ free-field measurements of sound absorption in porous materials, such as cellular plastic foams, glass-wool or recycled felt materials. The emphasis is given towards fine metrology of absorption in view of potential industrial applications. A powerful ultrasonic array working at 40 kHz is used. It enables to measure absorption acoustical data down to 100 Hz due to the exploitation of the non-linear ultrasonic demodulation phenomenon in air. Fine measurements of acoustic absorption are compared to numerical predictions based on the “equivalent-fluid” model (when the squeleton frame is motionless), and to some measurements performed on a Brüel and Kjaer impedance tube. Dispersion curves are also measured and compared to the numerical predictions for some automotive felt materials which are compressed at various ratios. Data obtained with a dedicated portable instrument are also discussed for the same type of materials and configurations.     

自适应双边滤波红外弱小目标检测方法

针对红外弱小目标检测,提出一种基于自适应双边滤波的背景预测算法.该算法利用空域低通滤波和图像灰度信息的非线性组合,自适应的对背景进行预测,达到提高弱小目标检测性能的目的.仿真和实验表明：与小波滤波的检测算法相比,该算法能够更加有效地从结构化背景中检测目标抑制背景.     

空化可压缩流动空穴溃灭激波特性研究

为深入研究空化可压缩流动中空泡/空泡团溃灭过程中激波产生、传播及其与空穴相互作用规律,本文采用数值模拟方法对空化可压缩流动空穴溃灭激波特性展开了研究.数值计算基于OpenFOAM开源程序,综合考虑蒸汽相和液相的压缩性,通过在原无相变两相可压缩求解器的控制方程中耦合模拟空化汽液相间质量交换的源项,实现了对空化流动的非定常可压缩计算.利用上述考虑汽/液相可压缩性的空化流动求解器,对周期性云状空化流动进行了数值模拟,并重点研究了空穴溃灭激波特性.结果表明:上述数值计算方法可以准确捕捉到空穴非定常演化过程及大尺度脱落空泡云团溃灭激波现象,大尺度脱落空泡云团溃灭过程分为3个阶段:(1) U型空泡团形成; (2) U型空泡团头部溃灭; (3) U型空泡团腿部溃灭.在U 型空泡团腿部溃灭瞬间,观察到激波产生,并向上游和下游传播,向上游传播的激波与空穴相互作用,导致水翼吸力面新生的附着型片状空穴回缩,直至完全溃灭.并且空穴溃灭激波存在回弹现象, 抑制了下一周期的空化发展.      

结合并行策略与距离减缩法的搜索算法及其在CAA中的应用

为提高流场与声场信息传递效率,建立了一种耦合MPI并行策略与改进距离减缩法的搜索算法。在完成点搜索后,采用一种适合于结构和非结构网格的形函数插值算法进行流场插值,实现了流场信息从流场网格到声场网格的快速传递。针对网格点搜索算法效率的验证,选用二维30P30N三段翼为研究对象,在不同的子进程数下进行对比分析。结果表明,相对于传统的距离减缩算法,本文提出的改进算法能有效提高CAA网格点的搜索效率,并且效率随着子进程数的增加而提高。在此基础上,将建立的流场与声场信息传递技术模块应用于CAA方法中,并对二维NACA0012翼型的后缘噪声问题进行计算分析,计算结果反映基于流场与声场信息快速传递算法的CAA方法能有效模拟宽频气动噪声问题。     

Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory （CLPT）. Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material ave based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss （TL） of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis （SEA） is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.     

A Conceptual Study of Cavity Aeroacoustics Control Using Porous Media Inserts

In this study, an integrated flow simulation and aeroacoustics prediction methodology is applied to testing a sound control technique using porous inserts in an open cavity. Large eddy simulation (LES) combined with a three-dimensional Ffowcs Williams–Hawkings (FW–H) acoustic analogy is employed to predict the flow field, the acoustic sources and the sound radiation. The Darcy pressure – velocity law is applied to conceptually mimic the effect of porous media placed on the cavity floor and/or rear wall. Consequently, flow in the cavity could locally move in or out through these porous walls, depending on the local pressure differences. LES with “standard” subgrid-scale models for compressible flow is carried out to simulate the flow field covering the sound source and near fields, and the fully three-dimensional FW–H acoustic analogy is used to predict the sound field. The numerical results show that applying the conceptual porous media on cavity floor and/or rear wall could decrease the pressure fluctuations in the cavity and the sound pressure level in the far field. The amplitudes of the dominant oscillations (Rossiter modes) are suppressed and their frequencies are slightly modified. The dominant sound source is the transverse dipole term, which is significantly reduced due to the porous walls. As a result, the sound pressure in the far field is also suppressed. The preliminary study reveals that using porous-inserts is a promising technology for flow and sound radiation control.